sonicshocklogo

Applications

 

Designed for use on flat panel televisions, but also recommended as a superior anti theft solution for any equipment - projectors, computers, printers - which have a 2 x 5.4 inch (5 x 13.6 cm) flat surface area for mounting

Dimensions

 

2 x 5.4 inches x 1.3 inches high (5 x 13.6 cm x 0.33 cm high)
The Sonic Shock Plasma is sufficiently thin to be affixed to the back of wall mounted flat panel televisions

Kit Contents

 

Alarm module
Mounting plate
Electronic tether
Ilco removable core lock
9 volt industrial alkaline battery
Installation & User Guide

Kit does not include glue or keys; these items are ordered separately. (Distributors ordering kits from us for their inventory typically specify a glue cartidge and 2 keys in each kit. Most customers, however, can economize by ordering only 1 glue cartridge for every four Sonic Shock Plasma alarms, and only a handful of keys.)

Construction

 

Alarm housing: 0.05 inch / 1.3 mm thick 18 gauge hard grade brushed stainless steel

Mounting plate: 0.07 inch /1.9 mm thick 14 gauge hard grade stainless steel

Acoustic Generator

 

Mounting plate: 0.07 inch /1.9 mm thick 14 gauge hard grade stainless steel

Locks

 

Ilco 5 wafer cam lock
Removable core
Available keyed alike or keyed differently (200 combinations)
The same key can operate Sonic Shock 4, Sonic Shock Plasma, and Sonic Shock 3 or 2 versions (now discontinued).

Power

 

9 volt industrial alkaline battery
650 milliamp hour capacity
1 microamp monitoring current
600 milliamp current at full alarm

Battery Life

 

5+ years in monitoring mode (50 years theoretically possible)
1 hours in full alarm

Control Circuit

 

Proprietary Comprotec single purpose analog computer

Adhesive

 

Methylmethacrylate kit ("Plastic Welder")
2 part exothermic cure non toxic structural adhesive
3,500 psi strength on al metals and most plastics (except polypropylene)
Very high impact resistance (eg. hammer blows)
4 minute working time; 80% strength in 2 hours; 100% in 24 hours
Impervious to water or solvents when cured

Surface Bonding Area

 

63 square centimeters / 10 square inches

Weight

 

600 grams

Operating Temperature

 

0 - 45 degrees Centigrade
Alarm is intended for indoor use

Environmental

 

All Sonic Shock electronics are European Union RoHS compliant (lead free electronics)
All packaging, master packaging, and paper inserts are fabricated from 100% recycled materials

Support

 

Instructions included with every kit
Additional Web based assistance under "Support" at www.sonicshock.info

Warranty

 

Product, excluding the battery, is warrantied for life, and for all causes (including damage inflicted by customer or a theft attempt). Warranty is limited to repair or replacement of the alarm FOB our factory or authorized distributor.


Sonic Shock is designed & manufactured in Ontario, Canada by Comprotec Corporation • www.comprotec.com • www.sonicshock.info • info@comprotec.com
In North America: Tel + 1 888 288 7078 Fax +1 888 285 3250
Outside North America: Tel + 1 613 967 6567 Fax +1 613 968 5786
Sonic Shock and it's variants are registered trade marks owned or licensed by Comprotec Corporation
Copyright Comprotec Corporation 2011